1] What is the sound output level of a hooter?
The industrial hooters as provided by us have an absolutely
great sound output. High sound is very much needed to alert
the occupants in premises of a possible danger. A good
industrial hooter comes with a sound output of 95- 100 dbs.
It is tested at meter range. There are other devices which
have a volume sound output that comes in AC & DC options.
2] Can I change the mounting of the hooter?
No, you cannot change the mounting of a hooter. There are
however special products which may be fitted with a bracket
as that would serve your purpose. Electronic hooters,
Electronic Hooter with Flasher, Single Multi or Fault
Indication Hooter, Electronic Hooter with Detachable
Speaker, base mounting, flush mounting are just some of the
hooters in our exclusive catalogue.
3] How do you support your products?
What do I do in case I receive a damaged good or a
defective piece?
We will readily replace any defective equipment without
charging you a penny extra or for that matter wasting any of
your further time. This is however a rarity with us as each
unit of equipment goes under the scanner while under
production. Only the fittest of equipments are packed ready
for use. Still if by any chance there is an unexpected
damage the good will be immediately replaced with a fine
working indicative product.
4] do you also provide with bus bar indication ?
Yes we do provide with bus bar indicators as well. These can
be of great efficiency when used on Over Head/EOT
cranes/hoists where replacement of bulbs is extremely
difficult. They are widely used as a
power feeding system for light duty and medium
duty of overhead cranes. This be at manufacturing shops,
warehouses, material storage yards, etc. They
may as well be used as Panel type indication.
5] Can I change tower light sequence?
No, a tower light sequence cannot be changed manually.
However we would be more then pleased to provide you with a
customized power light sequence depending on your
requirement.
6] We need wiring diagram in tower sector; do you
supply it with the products?
Yes. We provide you with absolute wiring diagrams as well as
the needy equipments which are again the most advanced and
the latest of models. Depending on the area size we would
thus provide with ample indicative products as needed to set
up a proper alarm system in a tower sector. The absolute
transparency in the communication sees you being aware of
everything from the very descriptions of the indicative
products to be installed as well as their prices.
7] Which are the best indicative products for CNC
machines, and injection molding machine material handling
equipments, steamers and control panels?
There is an assortment of indicative equipments to be chosen
from readily which work very potently when used in a
combination. These include Tower lights, hooters, hooter
with flashers, flasher, revolving lights, gong bells that
come in different sizes etc. These reliable gadgets provide
with optimum safety and alertness. In the mean time gong
bells, hooters and hooters with revolving lights are
indispensable for steamers. The various types of alarm
system can be efficiently used in different industries.
8] We are having injection molding machines, what do
you suggest for indicting product time over?
Tower light and flasher is the thing for you to go for.
These come in a range as far as the number of lights
involved is concerned. One may have from one to five lights
in a tower stack .None the less you would also do good to go
for voltage rating from a leading accreditation giving
organization.
9] Earlier I had light indication for my textile
machines, I lost many meters of clothes, what do you suggest?
Even you would do good to go for hooter tower lights with a
buzzer. This will give you better alertness and superior
machine status indication. This will result in avoiding of
the losses as you have unfortunately experienced previously.
10 ] where
are tower lamps used ?
Tower lamps are used for alarm and machine status
indication. They send both audio and visual signal used in
CNC, injection molding etc. they come in twp types. There
are tower lamps which are completely on while others which
flash at intervals. The tower lamps as provided by us apart
from being of the finest make are also Vibration proof and
have an extremely Long Life.
11] If I choose to become your loyal customer, What
should I expect in return?
People choose to become a company’s loyal customers only
after thoroughly being satisfied with that company’s
products and services for years. When it comes to the
electrical indication equipment category we constantly look
at bettering ourselves and further pushing the limits to
give you simply better then the best. For the same we at
Target Electricals follow our quality policy and objectives
without any compromise. This apart, through our management
review meetings, internal audits, self-assessment, analysis
of data, corrective and preventive actions, we see to it
that we are constantly on a innovation and improvement path.
|
|
----------------------------
Customer
Knowledge Base
----------------------------
----------------------------
Image Galley
----------------------------
Downloads
|